64 95 142 D3632
D3632
.
031.01.02
.
02 03.2016
59
Sirona Dental Systems GmbH
5 Installation: X-ray unit
Installation Manual ORTHOPHOS SL
5.4 Installing the floor stand (option 2)
båÖäáëÜ
Setting up and leveling the unit
1. Remove the transport safety device (see section “Remove the
transport safety device [ → 63]”).
2. Insert screw (P) through the washer and then from the rear through
the support and into the stand.
3. Fit the profile clamp (Q) onto the screw (P) from the other (front) side
and screw the nut (R) onto the screw (P).
4. Tighten adjusting nuts (O) and screw (P) firmly.
5. Set up the unit including the central styrofoam packaging and position
it in its ultimate location.
R
Q
P
P
1x Ø 10,5
1x M10x50
Q
1x M1
0
1x
R
IMPORTANT
Observe the required movement range of the unit during installation.
