Sirona galileos, Руководство по обслуживанию, Страница: 88 / 388

61 25 665 D3437
88 D3437
.
076.01.15
.
02 06.2012
5 Messages Sirona Dental Systems GmbH
5.5 List of error messages Service Manual GALILEOS
5.5
List of error messages
List of error messages
In the following table, the error codes are sorted by the location or function
unit where the error has occurred. For enhanced clarity, the
corresponding ID in the error code is printed in bold type.
5.5.1 Location 06: Tube assembly/DX6
Location 06: Tube assembly/DX6
E6 06 02 GALILEOS
E6 06 03
E6 06 04
E6 06 05
Error code Description Actions required see
E6 06 01 General error during module
initialization
● Please contact the Sirona Customer
Service Center (CSC) to find out
whether a bug fix by means of a
software update is possible and
perform such an update if necessary.
S. [ → 61]
If the error occurs repeatedly ...
● Replace the tube assembly.
S. [ → 310]
Error code Description Actions required see
E6 06 02 Invalid system data or uninitialized
module storage data
● Please contact the Sirona Customer
Service Center (CSC) to find out
whether a bug fix by means of a
software update is possible and
perform such an update if necessary.
S. [ → 61]
Error code Description Actions required see
E6 06 03 Invalid commanding of control data,
CAN bus error
This error may also occur in
connection with other causal error
messages! Please also observe the
causal error message! It appears
only after you acknowledge the first
error message.
● Check the CAN bus. S. [ → 128]
● Please contact the Sirona Customer
Service Center (CSC) to find out
whether a bug fix by means of a
software update is possible and
perform such an update if necessary.
S. [ → 61]
Error code Description Actions required see
E6 06 04 Data transfer error or dialog error to
module (master side)
● Check the CAN bus. S. [ → 128]
● Please contact the Sirona Customer
Service Center (CSC) to find out
whether a bug fix by means of a
software update is possible and
perform such an update if necessary.
S. [ → 61]
Error code Description Actions required see
E6 06 05 Data transfer error or dialog error to
bootloader of module
Only occurs in connection with
software update.
● Repeat the software update. S. [ → 61]
● Check the CAN bus. S. [ → 128]
If the error occurs repeatedly or the module
is no longer addressable ...
● Replace the tube assembly.
S. [ → 310]