Sirona CEREC MC XL Premium Package Скачать руководство пользователя страница 10

Страница: 10 / 78

63 98 536 D 3439

D 3439

201.06.10

02 10.2017

4 Safety

Dentsply Sirona

4.1 Basic safety information

Operating Instructions CEREC MC XL Premium Package

Safety

4.1

Basic safety information

4.1.1

Prerequisites

4.1.2

Maintenance and repair

As manufacturers of dental instruments and laboratory equipment, we

can assume responsibility for the safety properties of the unit only if the

following points are observed:

● The maintenance and repair of this unit may be performed only by

Dentsply Sirona or by agencies authorized by Dentsply Sirona.

● Components which have failed and influence the safety of the unit

must be replaced with original (OEM) spare parts.

Please request a certificate whenever you have such work performed. It

should include:

● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.

4.1.3

Modifications to the product

Modifications to this product which may affect the safety of the operator,

patients or third parties are prohibited by law!

NOTICE

Important information on building installation
The building installation must be performed by a qualified expert in

compliance with the national regulations. DIN VDE 0100-710 applies in

Germany.

NOTICE

Restrictions regarding installation site
The system is not intended for operation in areas subject to explosion

hazards.

NOTICE

Do not damage the unit!
The unit can be damaged if opened improperly.
It is expressly prohibited to open the unit with tools!

Содержание CEREC MC XL Premium Package















































































Результаты поиска

Содержание CEREC MC XL Premium Package

Отзывы:

Похожие инструкции для CEREC MC XL Premium Package

Бренды по названию

Популярные бренды

Sirona CEREC MC XL Premium Package, Руководство по эксплуатации

Результаты поиска

Содержание CEREC MC XL Premium Package

Отзывы:

Похожие инструкции для CEREC MC XL Premium Package

Бренды по названию

Популярные бренды