Sirocco SCENIC Edge, Инструкция по установке и эксплуатации

Страница: 21 / 38

21
SECTION 13: TESTING FOR SPILLAGE
Close all doors and windows to the room containing the appliance.
Let the fire run on HIGH for five minutes.
Take a smoke match, light it, and using a smoke match tube, hold it at the top edge of the
fire opening, 25mm down and 25mm in.
Run the smoke match across the opening, all the smoke should be drawn away up the flue.
Any smoke returning into the room indicates that spillage is occurring.
If the initial spillage test fails, run the fire for a further 10 minutes and repeat the test.
When the test has been completed satisfactorily, repeat with any extractor fans in the
premises running on the highest setting, and any communicating doors open.
Finally, repeat with all doors open.
DO NOT allow the fire to be used until the test is satisfactorily passed.
SECTION 14: BRIEFING THE CUSTOMER
All instructions must be handed to the user for safekeeping.
Show the customer how to light and operate the fire.
After commissioning the appliance, the customer should be instructed on the safe use of the
appliance and the informed for the need of regular servicing.
Frequency of service depends on usage, but MUST be carried out at least once annually.
Cleaning of the fire may be achieved when the fire is cold using a damp cloth and mild
detergent on most surfaces, with the exception of the ceramic fuel bed.
A soft brush i.e. paint brush may be used to clean the ceramic fuel bed taken care not to use
excessive pressure.
Scratched and other superficial damage to the matt black paintwork of the appliance can be
covered with matching heatproof spray.
Use only the manufacturers’ recommended spray paint.
Paint only when the fire is OFF and cold. Always mask off the surrounding area to prevent
contamination with overspray.
Ventilate the room during the use of the spray. DO NOT attempt to spray paint the coals or
ceramics, or wash them in water.