8
2.3 - ELECTRICAL CONNECTION
Check that the data reported on the
technical-part number plate (
Fig. n°18
), the
delivery documents and the order, correspond;
contact the supplier for cla-rification if they do
not.
At this point make sure that the system is
standard and that the cable and grounding
system perfectly operate.
2.3.1 - Slicer with single-phase motor
Fig. n°18
2.4 - 115 V. ELECTRICAL DIAGRAM , ‘SIDNEY’ PUSH-BUTTON
Fig. n°20
The slicer is equipped with a feeding cable with a cross section area of AWG; length
≅
1.5m
and a “UL” plug. Connect the 120 V. - 60 Hz slicer, interposing a magnetothermic differential
switch of 10A,
Ι∆
= 0.03A.
2.4 - 120 V. ELECTRICAL DIAGRAM SWITCH
Fig. n°19
—–
—–
