18
1.
2.
disinsert the plug from the outlet and
carefully
clean the blade with
denatured alcohol
so it is degreased;
lift (a) the sharpener (1)
and turn it
180° (b
Fig. n°40)
;
5.3 - SHARPENING THE BLADE
WARNING: Before starting to sharpen the blade, pay attention to RESI-DUAL RISKS
(chapter 4.2.2) concerning the dangers of cutting without ha-ving followed the instructions
listed below.
To sharpen the blade, which needs to be done periodically as soon a decrease in cutting is
noticed, the following directions must be adhered to:
Fig. n°40
Fig. n°41
c
d
1
b
a
3.
let it go in a way that the sharpener
(c)
c) fits on the loc
r pins (d
Fig. n°41
);
4.
check also that the blade stays be-tween the
two grinders;
5.
insert the pin and start the machine,
by
pressing the “ON” push-button;
6.
press the push-button (2
Fig.n°42
),
let the
blade rotate in contact with the
grinder for about
30/40 sec. so that a
slight burr forms on the
blade edge;
7.
press the 2 push-buttons (2 and 3)
contemporaneously for 3/4 sec. and
release
them in the same instant
(
Fig. n°43
);
8.
after having completed the sharpe-ning it is
advisable to clean the grin-ders and the blade
(
chapter 6.2.3
);
Fig. n°42
2
