Star
t Her
e
1
Charge the Aviation Receiver
The battery in the SXAR1 Aviation Receiver needs to be fully charged before using it
for the first time.
A.
Connect the USB cable included with the
receiver to the USB port on the side of the
receiver.
B.
Connect the other end of the USB cable to the
AC Power Adapter and plug the adapter into a
standard AC outlet.
C.
Initially the charging indicator light will be red
indicating that the battery is charging. When
the battery is fully charged the indicator light will turn green.
NOTE:
The receiver may also be charged using a USB charging adapter (not included)
which is plugged into a 12 volt power adapter socket in a vehicle or aircraft.
IMPORTANT:
The USB port of the receiver is for charging purposes only.
Do not
connect
to other devices.
USB
Port
Charging Light
3
Bluetooth
®
Pairing
The SXAR1 Aviation Receiver needs to be paired with your iPad.
A.
Once the Aviation Receiver’s battery is fully
charged, press and hold the Power button on the
side of the receiver until the red light on top of
the receiver changes color. As the receiver turns
on, the lights at the top of the unit will briefly
illuminate.
B.
Wait a moment for the receiver to start and verify that
the blue Bluetooth light on top of the receiver lights
during the power-up.
C.
Verify your device has Bluetooth and it is turned on. Tap Settings, look for Bluetooth
and verify that it shows On. If not, tap and drag the Bluetooth slider to the right to
turn it on.
D.
Your iPad will search for and display any Bluetooth devices it finds under DEVICES.
Find
SXM_XXXXXXXX
in the list (the Aviation Receiver) and tap it. (
XXXXXXXX
represents the unique ESN number of the Aviation Receiver.)
E.
Your iPad will now connect with the receiver. If prompted for a passcode, enter
00000000
. When pairing is successful,
SXM_XXXXXXXX
will show “Paired” to the
right. Press the Home button to exit.
Power Button
Bluetooth Power
On Light
4
Activating the SiriusXM Aviation Receiver
Before using the SXAR1 Aviation Receiver it should be fully charged. Alternately, you can
connect it to a USB charging adapter (not included) which is plugged into a 12 volt power
adapter socket in the aircraft.
IMPORTANT:
The SXAR1 Aviation Receiver is designed to be used at a minimum distance
of 8 inches away from any person. Recommended orientation is with the no-skid pad on
the bottom on a flat surface or mounting with a substantially clear view of the sky.
A.
Turn the receiver on and place it
on the dashboard under the front
windshield of the aircraft so that
the top of the receiver has a clear,
unobstructed view of the sky.
B.
Allow enough time for the receiver
to find and receive the GPS satellite
signals, and the SiriusXM satellite
signal, typically less than 5 minutes if
there are no obstructions to the sky.
C.
Verify that the receiver is receiving the
signals by checking the lights on the
top of the receiver. When the receiver
has a lock on the GPS satellites, the
GPS light will be green. When receiving
a good SiriusXM satellite signal, the
SXM light will be yellow. If the GPS
and/or SiriusXM lights are not on after
5 minutes, try relocating the receiver
in a different location where there is a
better unobstructed view of the sky.
D.
When the receiver is receiving good signals, you’ll need to activate the receiver. Find
the Radio ID number on the label on the bottom of the receiver. Have the Radio ID
number ready and call SiriusXM at:
1-855-SXM-WTHR
(1-855-796-9847)
to activate the receiver and select your subscription package.
GPS
Satellites
SXM
Satellites
2
Install the SiriusXM App
Install the SiriusXM App on your iPad®.
NOTE:
Works with iPad 2 and higher and iPad Mini.
A.
On your iPad, go to the SXM aviation web page
www.siriusxm.com/sxmaviation
to
find the latest compatible Apps.
