background image

Registered in England No. 08405712
VAT Registration No. GB163 04 0349 

Siretta Ltd

Basingstoke Road

Spencers Wood

Reading

Berkshire RG7 1PW

sales
fax
email
web

+44(0)118 976 9000
+44(0)118 976 9020

[email protected]

www.siretta.com

35

SNYPER-3G Family

User Manual

The information contained in this document is proprietary to Siretta Ltd. Siretta 
Ltd has made every effort to ensure that the information contained within 
this document is accurate. Siretta Ltd does not make any warranty as to the 
information contained within this document and does not accept any liability for 
any injury, loss or damage of any kind incurred by the use of this information.
Siretta Ltd does not take responsibility for any cellular product or system installed 
because of a survey conducted by the SNYPER-3G Family characterized in this 
document, and notes that any application deployed as a result of conducting a 
survey with the SNYPER-3G Family must comply with the regulatory and safety 
standards of the country in which is used. Siretta Ltd reserves the right to make 

modifications, additions and deletions to this document due to typographical 

errors, inaccurate information, or improvements to the product at any time and 
without notice. Such changes will be incorporated into new editions of this 
document.

Please refer to the Siretta Ltd website for the latest firmware and documents.

Disclaimer

Содержание SNYPER-3G Series






































Отзывы: