Siqura XCU Series, Руководство пользователя

Страница: 33 / 64

Event
Page 33
Link an action to a digital I/O event
On the Event Management page, you can add events triggered by "I/O # closed" and define
actions to be taken when such events occur.
7.4 FTP Push
On the Event Management page, events can be set to trigger an FTP push. When such an event
occurs, the unit posts a camera image on one or two FTP servers. A target server must hold a
user account associated with the unit. If you assign two servers, images are posted
simultaneously to FTP server 1 and FTP server 2.
7.4.1 Servers
Set up the FTP server connection
1
Select the
Enable
check box of
Send to this server
.
2
In
IP address
, type the IP address of the FTP server you want to use.
3
In
Port
, type the port number to be used.
The FTP protocol typically uses port 21 on the FTP server to listen for clients initiating a
connection. Port 21 is also where the server is listening for commands issued to it.
4
In
Name
, type the user name that is needed for authentication before you can access the
server.
5
In
Password
, type the password that is needed for authentication before you can access the
server.
6
(Optional) Repeat steps 1-5 for the second FTP server.
7.4.2 Camera-#
On the Camera-# tab, you can set the path to an FTP server and configure settings for
continuous posting.
Server path
In the Server path box, type the name of the folder on the FTP server which is assigned to the
FTP client. Example:
\Captures\Cam-
This can be used if the client is not allowed to access the
server root folder.
Click
Test FTP settings
to make sure that the server path has been set correctly. A message in
the top of the screen will indicate if the camera has been able to make a connection with the FTP
server or not.
Continuous posting
Image upload to an FTP server can be event-triggered but you can also set it to be continuous.
1
In
Interval
, type a value to determine the interval between two image posts.
2
In
File name
, type a descriptive name or accept the default name.
With the append button you can add extra information to the file name.
3
To activate continuous posting, select
Enable