Camera
Page 20
Hue
Use this function to enhance the colours in the video images if they do not look natural.
6.2.6
Enhancement
Note:
Settings on this page vary from model to model.
Stabilizer
The camera system can provide image stabilisation to compensate for small amounts of camera
shake. Available options: Off, On, and Hold. Select Hold if you want to keep the current image
steady.
High resolution
This mode enhances edges and produces images of higher definition.
Noise filter
The NR function can remove noise (both random and non-random) to provide clearer images.
You can control the level of noise reduction with the Noise filter strength slider.
Noise filter strength
Sets the level of noise reduction. The noise reduction effect is applied in levels based on the gain
and this setting value determines the limit of the effect. In bright conditions, changing the noise
reduction level does not have any effect. This function is available if Noise filter is selected.
Defog
Enhances low-contrast images - in foggy weather conditions, for example - to make them stand
out more clearly. Available levels: Off, Low, Medium, and High.
Highlight mask level
Use this function to mask extremely bright parts of the image with a grey colour.
Picture effect
Includes the following modes.
None
Does not apply any picture effect.
Negative art
Reverses negative and positive. Black, white, and colours are reversed.
Black and white
Produces a black and white (monochrome) image.
6.3
Thermal Settings
Note:
Availability of this feature depends on the model at hand.
The Thermal Settings page is where you configure the settings for video from the thermal
sensor. Changes you make are immediately applied and shown in the preview.
