Unpack
Connector Definition
Installation Notices
Connectors
Drill diagram
Mounting
SA-BL37
2MP Corrosion proof compact bullet, 3.7mm
Quick Start Guide
Find additional manuals, the datasheet,
the EU Declaration of Conformity, and
the latest firmware for this product at:
Siqura.com/downloads/software
SA-BL37 Camera Unit
Note 1
: Subject to modification. Actual product and accessories may differ in appearance.
CAUTION:
INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL ONLY.
INSTALLATION SHALL BE IN ACCCORDANCE WITH LOCAL PROCEDURES.
THE CAMERA CONTAINS BATTERIES. DISPOSE OF USED BATTERIES IN
ACCORDANCE WITH LOCAL REGULATIONS.
IF YOU USE AN EXTERNAL POWER SUPPLY, CONTACT SIQURA TO MAKE SURE
THAT THE POWER SUPPLY HAS THE PROPER POWER SPECIFICATIONS.
MAKE SURE THAT THE POWER SUPPLY COMPLIES WITH LPS REQUIREMENTS.
THE CAMERA IS TO BE CONNECTED ONLY TO POE NETWORKS WITHOUT
ROUTING TO THE OUTSIDE PLANT.
For the connector definitions, see table 1.
© Siqura B.V. 2020
Version 1.1 (20201119)
SA-BL37 QSG
Table 1 Connector definitions
RJ45 water protection (IP66/67)
NO
Item
Description
1
RJ-45
Ethernet, RJ-45 port compatible
with 10/100Mbps PoE Modular Jack
2
DC Jack
Main Power, DC Jack, 12Vdc
3
AI: Alarm In
Alarm input and output, 3pin terminal
G: GND
AO: Alarm Out
4
MIC: Audio In
Audio line input, 2pin terminal
G: GND
5
SPK: Audio Out
Audio line output, 2pin terminal
G: GND
Upright mount
Ceiling mount
Dimensions in mm.
Dimensions in mm.
