9.3
IP Address Filter
Security > IP Address Filter
On the IP Address Filter tab, you can deny/allow access to the camera from specific IP
addresses.
To turn on the IP address filter
1
Select Enable IP Address Filter.
2
In the IP Address Filter Type list, select Forbidden or Allowed, as required.
Forbidden: Forbid the IP addresses added in the IP Address Filter list to log in.
Allowed: Allow only the IP addresses added in the IP Address Filter list to log in.
3
Set up the IP Address Filter list (see below).
4
Click Save.
To add an IP address
1
Click Add.
2
Type the IP address.
3
Click OK.
4
Click Save.
To modify an IP address
1
Select the IP address in the list.
2
Click Modify.
3
Type the new IP address.
4
Click OK.
5
Click Save.
To delete an IP address
1
Select the check box of the IP address in the list.
To select all IP addresses, click the header row check box.
2
Click Delete.
3
Click Save.
Security
45
