4
Attach the waterproof boot to the gooseneck tube/mini wall mount.
5
Attach the indoor tube adapter to the gooseneck tube/mini wall mount.
6
Thread the cables through the gooseneck tube/mini wall mount and the indoor tube
adapter.
Note: After threading the cables, block the cable entry hole with the supplied
sponge(s) to prevent insects from entering the tube.
7
Attach the fixing plate to the back of the dome with the supplied screw.
8
Adjust the waterproof boot to the junction of the gooseneck tube and the indoor tube
adapter.
9
Connect the cables to the dome camera. Then attach the dome to the indoor tube
adapter and fasten them together with the supplied screw.
Corner wall mounting: corner standard mounting plate + gooseneck tube/
mini wall mount + indoor tube a waterproof boot
5.5
Pole mount
There are two ways to mount the MSD620 cameras on a pole:
● Using a thin/wide direct mount as described in the section Pole thin/wide direct mounting.
● Using a thin/wide box mount as described in the section Pole thin/wide box mounting.
5.5.1
Pole thin/wide direct mounting
The dome can be installed to a pole with a thin/wide direct mounting accessory and a
gooseneck tube.
Items needed
● Dome camera
● Gooseneck tube and other equipped items (optional accessory)
Install the camera
27