The current cruise stops and is no longer repeated.
8.3
Autopan
PTZ > Autopan
Autopan is the motion of scanning an area horizontally so the dome camera captures a
horizontal view. The HSD820 series cameras support up to four programmable autopan paths.
To record an autopan path
1
On the PTZ tab, click Autopan in the menu on the left.
2
Under Autopan setting, select a path number on the Autopan path list.
Note: An existing recording stored under the selected path number will be overwritten
with the new recording.
3
Select a pan speed from the Speed list.
4
From the Direction list, select a direction for the autopan. For more information, see
below.
5
Position the pointer on the live view pane.
6
Keeping the left mouse button pressed, drag the (red) pointer across the live view to
move the camera to the starting point of the autopan path.
7
Click the Set button of Start point.
Note: The zoom ration of an autopan start point will persist throughout the entire
path.
8
Move the camera to the desired end point of the autopan.
9
Click the Set button of End point.
To execute a defined autopan path
1
On the PTZ tab, click Autopan in the menu on the left.
PTZ&IMAGE
80