Siqura HSD820 Series Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 101

Siqura HSD820 Series Скачать руководство пользователя страница 79

8.2

Cruise

PTZ > Cruise

Cruise is a route formed with manual operation (through adjusting the pan and tilt position),
which can be stored and recalled to execute repeatedly. The HSD820 series cameras support
up to eight programmable cruise paths.

To record a cruise path

1

On the PTZ tab, click Cruise in the menu on the left.

2

Under Cruise setting, select a path number on the Cruise path list.

Note: An existing recording stored under the selected path number will be overwritten
with the new recording.

3

Position the pointer on the live view pane.

4

Keeping the left mouse button pressed, drag the (red) pointer across the live view to
move the camera to the starting point of the cruise path.

5

Click the Set button of Record start.

6

Pan, tilt, and zoom the camera to program the cruise path.

7

When finished, click the Set button of Record end.

To execute a defined cruise

1

On the PTZ tab, click Cruise in the menu on the left.

2

Under Cruise run, select the desired cruise from the Cruise path list.

3

Press Run.
The camera starts panning/tilting/zooming as recorded.
To view the cruise in full-screen mode, right-click the live view pane, and then select
fullscreen.
The cruise is repeated at ten-second intervals.

To stop running a cruise

● Drag the (red) mouse pointer across the live view pane in any direction.

PTZ&IMAGE

79

«
...
77
78
79
80
81
...
»

Содержание HSD820 Series






































































































Отзывы:

Нет отзывов