Dual Rate SFP Media Converter
Quick Start Guide
This quick start guide describes how to install and use the Dual Rate SFP media
converter. The converter introduced here provides one channel media conversion
solution.
Physical Description
Product Overview
This Dual Rate SFP media converter is a plug-and-play device. Connect the supplied
AC to DC power adaptor to the receptacle on the rear panel of the Dual Rate SFP media
converter, and then attach the plug into a standard AC outlet.
DIP Switch
No. Down
Up
1
Disable LFPT
Enable LFPT
LFPT:
Link-Fault-Pass-Through
function
2
Enable Auto-Negotiation for TX port
Enable Force mode for TX
port
3
TX port Force mode: Full-duplex
TX port Force mode:
Half-duplex
4
TX port Force mode: 100Mbps
TX port Force mode:
10Mbps
5
SFP at 100Mbps
SFP at 1000Mbps
6
Function reserved
Function reserved
<Note> Power must be off/on after re-setting LFPT function.
The 10/100/1000Base-TX and SFP Connectors
The 10/100/1000Base-TX Connection
The following lists the pinouts of
10/100/1000Base-TX port.
User’s Manual
1
