Y070.518/EN
Page 3
Supplement to operation instructions SIPOS SEVEN
2SL78 linear thrust unit
1
General
1 General
1 General
1�1 References to operation instructions
This supplement to operation instructions describes assembly of linear thrust unit and is only
complete in combination with the respective main operation instructions of SEVEN actuators
PROFITRON or HiMod.
For this reason, please heed all safety information contained in the main operation instructions of
actuator!
For reason of clarity, these operation instructions cannot comprise all detailed information to every
possible operation of installation, operation or maintenance. Consequently, the operation instruc-
tions are essentially provided for qualified staff in appropriate use of devices in industrial applica
-
tions.
For any question in particular in case of missing product specific details, please contact SIPOS
Aktorik sales department. Please also indicate type designation and serial number of the respective
actuator and the linear thrust unit (refer to name plates).
1�2 Safety instructions: Used symbols and their meaning
The operation instructions use the following symbols with their respective meaning.
Failure to
observe
may lead to serious injuries or damage.
Warning
marks activities which can affect the safety of persons or material if not performed cor
-
rectly.
Note
marks activities which have major influence on the correct operation. Failure to observe
these notes could result in consequential damage.