SIP 01938, Инструкция по эксплуатации

Страница: 9 / 12

16
OPERATING INSTRUCTIONS….cont
Operating The Tailstock:
• Move the tailstock (1) by loosening the tail-
stock lock lever (2) and sliding the tailstock
assembly to the desired position on the
lathe bed. Securely lock the tailstock into
position by tightening the lock lever.
• The tailstock spindle (3) can extend up to
2-½" from the tailstock housing. You can
move the tailstock spindle by loosening
the spindle lock lever (4) and then rotating
the spindle hand wheel (5).
• Be sure that lock levers (4) and (2) are se-
cure before operating the lathe.
•
The tailstock spindle is hollow and can be
accessed from the hand wheel end. Use
the push rod to remove the Morse Taper
live centre.
Operating The Tool Rest:
The articulated tool rest (1) may be used with or
without the extension arm (2).
•
To move the tool rest base (3) loosen the
lock lever (4) and slide the tool rest base
left or right along the lathe bed or it may
be moved forward or backwards.
9
GETTING TO KNOW YOUR WOOD LATHE