SINGLE POLE WIRING DIAGRAM
3-WAY WIRING DIAGRAM
Warnings
This light switch requires a neutral wire. If your electrical
box does not have a neutral wire, you can either add
one or install the light switch at a different location.
The installation of this light switch should be made by a
certified electrician and must be installed in conformity
with the national and local Electrical Codes.
SW2500ZB
Installation guide
Smart Light Switch
zigbee 3.0
YOUR SW2500ZB LIGHT SWITCH
INSTALL YOUR LIGHT SWITCH
Turn ON the light
Turn OFF the light
Indicator light
Light turned ON =
Blue
Light turned OFF =
Amber
The intensity of the indicator light can be changed from
Neviweb and some compatible Zigbee gateways.
Make sure that the breaker for your switch
is OFF at the main electrical panel then
remove the old switch.
Use the provided screws to secure the
light switch to the electrical box.
Then, replace the wall plate.
1
2
Use the provided connectors to
connect the wires as follows:
*Note:
For a single pole installation, do
not remove the label on the blue wire.
For a 3-way installation, consult the
3-way wiring diagram on the next page.
3
Power up
the switch.
4
Red
Black
White
Blue
Load
Line
Neutral
None*
Make sure to firmly tighten the
wire connectors for a secure
connection. A loose
connection can be a fire
hazard. Special CO/ALR
solderless connectors must be
used when connecting with
aluminum conductors.
Black (line)
blue (3-way)
White (neutral)
Red (load)
Electrical
Panel
Load
SW2500ZB
Load
Line
Single Pole
switch
Electrical
Panel
SW2500ZB
Red (load)
Black (line)
Blue (3-way)
White (neutral)
Load
Red
Black
White
blue
Load
Line
Neutral
(white)
Neutral
(white)
Line
Load
