Sinoboom GTTZ10EJ, Руководство по эксплуатации

Страница: 24 / 88

© Nov. 2020 3-6 GTTZ10EJ Operation Manual
SAFETY
UNSAFE OPERATION HAZARDS
• Do not push any object outside
the platform. The maximum
side force allowed is 400N (90
lbf) for indoor use and 200N (45
lbf) for outdoor use.
• Tow the machine only from the
tiedown/lifting points on the
chassis.
• Never use the mast/boom or
platform to stablize or support
any objects outside of the
machine.
• Do not modify any component
that may affect the machine
safety and stability.
• Do not replace key parts that
affect machine stability with the
ones of different weights or
specifications.
• Do not change or modify
moving aerial platforms without
the manufacturer’s written
permission.
• On the platform, do not attach
an additional device for placing
tools or other materials to the
guardrail. This will increase the
platform weight, surface area
and load.
• Do not put ladders or
scaffolding on the platform or
any part of this machine.
• Do not use the machine on any
mobile or movable surface or
vehicle. Ensure all tires are in
good condition, the slotted nuts
tightened and the cotter pins
complete.
• Do not use a battery that
weighs less than the original
one (30kg[66 lb]), and do not
remove or modify the
counterweight or other parts
inside the battery box. The
battery not only provides
power, it also serves as a
counterweight. The battery is
vital to maintaining the stability
of the machine.
• Do not place or attach any
suspended load onto any part
of the machine.
UNSAFE OPERATION HAZARDS
• Do not use the machine as a
crane.
• Do not use the platform or
boom to push the machine or
other objects.
• Do not allow the platform or
mast/boom to touch structures.
• Do not use rope or other
binding materials to tie the
platform or mast/boom onto
nearby structures.
• Do not put the load outside the
platform.
• When the platform is caught or
stuck or when other objects in
the vicinity impede its normal
movement, do not use the
platform controller to lower the
platform. If you intend to lower
the platform with a ground
controller, you must operate it
only after all personnel have
left the platform.
• When one or more of the
machine’s tires are off the
ground, evacuate all personnel
before attempting to stabilize
the equipment. Use a crane,
forklift or other suitable
equipment to stabilize the
machine.
FALL HAZARDS
The machine must be operated in strict compliance with
the requirements as contained in this manual and the
maintenance manual, as well as the applicable industry
or local regulations, whichever is more stringent.