|
Spectre 3.0 Assembly Manual
Revision 1.2
Page
| 19
Step 11: Install SSD Tray into PSU Shroud.
Pieces Involved
•
Spectre 3.0 Case
•
Fasteners – 16x M3 x 6mm
•
k
PSU Top Panel
•
Fasteners – 4x SO M3x7x6
•
r
SSD Tray
•
Fasteners – 4x M3 Nuts
4x 2.5" drives can be installed into Spectre 3.0. There are two locations to install 2.5" drives, the
SSD Tray or the PSU Top Panel. The SSD tray has 4x 2.5" drive positions and it fits inside of the
PSU shroud. The PSU Top Panel has 2x 2.5" drive mounting positions which are blocked when the
Vertical GPU Mount/s are used. The Spectre 3.0 integrated SATA Data cable management can fit
a maximum of 4x SATA Data cables.
See the diagrams below for the 2.5" drive mounting locations:
Install 4x SO M3x7x6 onto the 4 corners of the SSD Tray using 4x M3 Nuts. Use 2x M3 x 6mm
Fasteners to side mount drives onto the SSD Tray. Once your drives are installed you can install
the SSD Tray inside of the PSU Shroud using 4x M3 x 6mm Fasteners.
