17
Arcadyan Mesh Router:
LED Name
Status
Description
Power
White System is powered.
Flashing FW is being upgraded.
Red
System fail. Please contact 1606.
Internet
White Internet service is on.
Flashing Getting IP address or No IP address.
Off
No WAN Ethernet connected.
LAN
White One of the Ethernet LAN cable is linked.
Off
No Ethernet LAN cable is linked.
Mesh
White Mesh connected – Good.
Flashing Mesh is being paired.
Red
Mesh connected – Bad. Please contact 1606.
Off
No Mesh paired.
Steps
Description
Step 1
Plug the power adapter into the power socket on the rear of the Router, and
the other end into a power outlet.
Step 2
Use RJ-45 cable to connect from port 1 of the ONT device and the other end
to the ETHERNET or INTERNET WAN port (depending on your Router model).
Step 3
Use RJ-45 cables to
connect any of the four LAN ports on the Router and an Ethernet adapter on
your PC.
Step 4
If needed, you can use a 4G dongle to plug in the USB port.
