Singer Tradition 2250, Инструкция по эксплуатации

Страница: 51 / 82

Install the darning plate. (1)
Change presser foot to button sewing foot. (2)
Position the work under the foot.
Place the button in the desired position and lower the foot.
Set the pattern selector knob on " " and sew a few securing
stitches. Select one of the two narrow zig-zag patterns
according to the distance between the two holes of the button.
Turn the handwheel to check if the needle goes into the right
and the left hole of the button without hitting the button. Slowly
sew on the button with about 10 stitches.
Select pattern " " and sew a few securing stitches. (3)
If a shank is required, place a darning needle on top of the
button and sew (4). For buttons with 4 holes, sew through
the front two holes first (3), push the work forward and then
sew through the back two holes. (4)
44
GB Sewing on buttons
4
3
1 2