SINFONIA TECHNOLOGY CO.,LTD.
HTE302412
H3-200
Supplementary
Supplementary
Supplementary
Supplementary instructions
instructions
instructions
instructions for model EA
for model EA
for model EA
for model EA----15B and EA
15B and EA
15B and EA
15B and EA----20B
20B
20B
20B
1.
1.
1.
1. Mounting of the stroke detector
Mounting of the stroke detector
Mounting of the stroke detector
Mounting of the stroke detector
●
The stroke detector shall be mounted as shown in the
drawing. The detector is mounted on the leaf spring with
the detector-support which is supplied by us with an
additional expense.
The list below shows you the size of
the detector-supports.
●
The detector-support shall be mounted together with the
leaf springs on the base frame. When you have a
detector-support for the old model EA-15 or EA-20, you
can mount the detector on the moving frame with the leaf
spring mounting screw. The screw must be fastened
tightly or the stroke of the bowl might fluctuate.
●
The cable of the detector should be fixed with the cable
clamp with some slack without contact against the other
body or shaking.
The sizes of the detector-supports
●
The recommended stroke detector must be the proximity sensor head “EH-110” supplied by KEYENCE.
Applicable model
Ｗ
φＤ
Ｌ１
Ｌ２
EA-15B
16
7
45
25
EA-20B
19
9
50
30
1/2
