Sindoh D310 Series, Руководство пользователя, Страница: 92 / 324

[Web Management Tool] 8-11
8.5 Configuring the WS printing environment 8
Using the proxy server
Configure settings for printing through this machine in the environment where the multicast communication
is restricted using the discovery proxy defined by WS-Discovery. Configure the setting if your environment
requires the discovery proxy server.
In normal circumstances, to print data through this machine using the Web service, the computer must be
connected at a location where multicast communication is available for this machine. However, installing the
discovery proxy server at a location where unicast communication is available for this machine enables print-
ing through this machine.
In the administrator mode, select [Network] - [DPWS Settings] - [DPWS Extension Settings], then configure
the following settings.
Using SSL communication
Communication between this machine and the computer is encrypted with SSL.
To encrypt SSL communication between this machine and the computer, you must set the bidirectional SSL
communication between them. Before starting this procedure, confirm the following.
- Name resolution must have been performed in the DNS server.
-
If the certificate of this machine is not the one issued by the Certificate Authority (CA), you must register
the certificate of this machine in [Trusted Root Certification Authorities] of the computer.
-
Create a certificate in the computer side in advance, and associate it with the TCP/IP communication
port (default port number: 5358).
Tips
- In Windows 8.1/10, a communication using the Web service cannot be encrypted using SSL.
Enable the SSL communication. In addition, specify how to verify the certificate.
[WSD Print V2.0 Set-
ting] To use functions of WS printing version 2.0, select [Enable].
When you connect this machine from the computer compatible with version
2.0, you can issue a printing prenotification to this machine, send account in-
formation, specify parameters for the advanced device functions, or obtain the
device capability and localization information.
[Enable] is specified by default.
[Printer Name] Enter the name of this machine when using it as the WS printer (using up to 63
characters).
[Printer Location] Enter a printer location if necessary (using up to 63 characters).
[Printer Information] Enter printer information if necessary (using up to 63 characters).
Settings Description
Settings Description
[Enable Proxy] Select [ON] to use the discovery proxy.
[OFF] is specified by default.
[Proxy1] to [Proxy3] Register the discovery proxy server used on this machine.
[Proxy
Server
Address] Enter the discovery proxy server address.
Use one of the following formats.
•
Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File
Path] Enter the service name at the path of the URL where the WS-Discovery service
is published in the discovery proxy server (using up to 255 characters).
[Enable
SSL] When using SSL to encrypt a communication with the discovery proxy server,
select [ON].
[OFF] is specified by default.
[Proxy
Server
Port
Number] If necessary, change the port number of the discovery proxy server.
In normal circumstances, you can use the original port number.
When [Enable SSL] is set to [OFF], [80] is specified by default.
When [Enable SSL] is set to [ON], [443] is specified by default.