Sindoh A1SD Series, Руководство пользователя

Страница: 114 / 142

Checking Printed Output
4
-8
4
1.4 Enhancing Print Quality
1
Following the guideline for resin use
-
The print quality is seriously influenced by the condition of resin. Take note of the expiration date as
well as the storage and working temperatures marked on the resin.
-
Resin in the resin tank needs to be filtered regularly using mesh filter. As printing goes over and over,
contaminants and debris may increase in the resin tank. Please keep the resin clean by filtering
regularly.
-
It is recommended to filter the resin after approximately 10 times of printing.
For details of filtering the resin, please refer to “Resin Tank of Chapter.5 Maintenance”.
2
Working site
- Operating the machine in a place exposed to shocks and vibrations may cause print failure.
Use on a leveled place not affected by shocks and vibrations.
- Do not use it under conditions of dust or powder contamination. The optical system may be
contaminated, or contaminants may be mixed with the resin.
- Use it under proper temperature and humidity. For the recommended machine working condition,
refer to “Precautions of Before using the machine”.
- Avoid using it under direct sunlight or strong light.
3
Improving surface of print
- Air bubbles may trapped inside of the print.
Placing the print to the rear side of the platform or setting layer thickness thinner (i.e. 0.1mm to 0.05mm)
might help this problem.