Sindoh A1 Series страница 22 Скачать руководство пользователя

Страница: 22 / 133

10. Wifi Module Disclaimer

❖ This device includes a WIFI module compatible only with Sindoh’s 3D Printer models.

❖ Precautions

This Wifi module can cause radio interference, therefore it should not be used for any purposes
related to human lives.

Do not expose this product to water, humidity or liquid.

Do not expose this product to direct light, hot temperature or fire.

If the machine has been modified by unauthorized personnel, Sindoh is not liable for the
machine trouble or failure.

To prevent RF signals that exceed FCC RF exposure limits from being exposed to human, this
module has been mounted in a place that minimizes human access.

Wifi Module Inside

Before Using the Device

Содержание A1 Series






































































































































Результаты поиска

Содержание A1 Series

Отзывы:

Похожие инструкции для A1 Series

Бренды по названию

Популярные бренды

Sindoh A1 Series, Руководство пользователя

Результаты поиска

Содержание A1 Series

Отзывы:

Похожие инструкции для A1 Series

Бренды по названию

Популярные бренды