Sinclair GSH ERB-3 Series, Руководство по обслуживанию

Страница: 95 / 160

91
[Notes]
●This function is allowed only when the unit has just repowered and not turned on. For the unit which once has
been put into operation, this function is unavailable, alerting “ Wrong operation ”.
●This function will not be memorized upon power failure.
3.2.4.17 Control Logic of the Water Tank Heater
[Operation Instructions]
At the commissioning parameter setting page, by touching “
Tank heater
”, it will access to the setting page of
control logic for the water tank heater.
[Notes]
●“Reserved” will be displayed when the water tank is unavailable.
●This setting can be done only when the unit is off.
●This function can be memorized upon power failure.
●Logic 1: NEVER allowed the Unit’s Compressor and the Water Tank Electric Heater or the Optional Electric
Heater to work at the same time.
●Logic 2: While Heating/ C Hot water mode (Hot Water priority) Tset ≥ ΔThot water +2, when
water tank temperature reach THPmax, the water tank EH will be ON and start to do hot water, at the same time,
the compressor wil turn to heating/cooling mode, water tank EH and Compressor will be ON together.
3.2.4.18 Gate Control Memory
[Operation Instructions]
At the commissioning parameter setting page, by touching
"Gate-Ctrl Memory
”, it will access to the setting
page.
[Notes]
●When it is enabled, " Gate-Ctr " will be memorized upon power failure.
●When it is disabled, "
Gate-Ctr
" will not be memorized upon power failure.
3.2.4.19 Parameter Setting
[Operation Instructions]
At the commissioning parameter setting page, by touching “
PARAM.
”, it will access to the pages as shown
below.
Page of Commissioning Parameters
At this page, select the desired option and then go to the corresponding page.
After that, by pressing “
OK
”, this setting will be saved and then the unit will run based on this setting; or by