Hz Key Chain Transmitters 2 and 4 channels
Read all instructions carefully before use.
Hz Key Chain Trans
®
1) Program the motor using a
standard transmitter as per the
quick reference guide
2) Press the programming button
on the standard transmitter until
the motor jogs up/down
3) Touch the programming
contact on the back of the Key
Chain Transmitter with a metal
conductor (paper clip). The LED
on the front will start to flash
Programming
Contact
Paper
Clip
Flashing LED
4) Press the desired front button
while the LED is still flashing. The
motor will jog. This button will now
control the motor.
Repeat steps 1 through 4 for other buttons to other motors if desired.
Note: Only program one motor per button. The 2 channel key chain can be used
to control 2 motors maximum and the 4 channel can control 4 motors maximum
Programming Instructions
PGR
PROGRAMMING
