Simtronics GD1 MK3, Руководство по эксплуатации

Страница: 41 / 76

GD1 Page 41 of 76 850-816926-EN R06
5. MAINTENANCE
5.1. Regular maintenance
The detector does not have any internal functions that require regular monitoring or
maintenance. Regular maintenance consists only of cleaning the optics.
The GD1 has no user adjustable parts. Do not open the GD1. Opening the GD1 voids all
warranty offered at the time of sale. The manufacturer shall do all repairs. Please refer to
the general warnings in chapter 7.
5.2. Cleaning of optical surfaces
Take care not to scratch the lenses and optical coating while cleaning.
1)
First remove dust, sand, or other hard minerals using a soft brush or cloth, bulb
blower or dry and clean compressed gas or air. If using a compressed air gun or a
cloth, use it very lightly.
2) Spray the lens with a dilute solution of mild (dishwasher) detergent and water. It is a
good idea to first spray richly and let the cleaner dissolve some dirt and let it drip off
naturally. Repeat if necessary. If the dirt is still sticking a stronger solvent might be
required, a 1:1 mix of isopropyl alcohol and water can be used.
3) Wipe the lens lightly and carefully with a clean microfiber cloth or a lens cloth,
repeating step 2) and 3) until the surface is clean. Cotton swabs / Q-tips can be used
as an alternative.
4) Rinse with water and wipe dry.
5) Do not touch the lenses with your fingers.