Smart Machine Smart Decision
SIM800 Series_Bluetooth_Application_V1.02
23
2014-06-30
<mode>
Bearer/tele
service
0
Voice
1
Data
2
Fax
<mpty>
0 Call is not one of multiparty (conference) call parties
1 Call is one of multiparty (conference) call parties
<number>
String type (string should be included in quotation marks)
phone number in format specified by <type>.
<type>
Type of address
Note
If there are mulit calls, multi “
+BTCLCC”
will be reported, but
<index>
is diffrent
2.25.
AT+BTPBSYNC Sync phonebook from remote by BT
AT+BTPBSYNC Sync phonebook from remote by BT
Test Command
AT+BTPBSYNC
=?
Response
+BTPBSYNC: (0,1),(1-10),(0,1),(0,1),(0,1)
OK
Response
OK
If sync phonebook succeed in mode 0
+BTPBSYNC: <mode>,<result>,<length>
If sync phonebook failed in mode 0
+BTPBSYNC: <mode>,<result>
If in mode 1
+BTPBSYNC: <mode>,<sync2loc_result>,<succ_num>,<fail_num>
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+BTPBSYNC
=<mode>,<storag
e>,<loc>[,<loc_p
hb>[,<loc_mode>
]]
Parameterss
<mode>
sync mode
0
Get remote phonebook and save in file system. This file will
store phonebook in VCARD format.
1
Add phonebook records to ME or SM phonebook from VCARD
file. Should get remote phonebook file by mode 0 first.
<storage>
Phonebook storage to sync.
1 phonebook on phone storage
2 incoming call list on phone storage
