Simrad V5035, Руководство оператора и инструкция по установке

Страница: 61 / 118

| 61
Operation | V5035 Operator and Installation Manual
‘high’ when the target vessel is using an approved sensor to gener-
ate this data, or low if the data is derived from internal GNSS only.
draught of the vessel to the nearest cen ti meter.
INLAND ETA SETTING
2013/01/17 23:27:10
Dangerous Targets :0 IL
[NL]
[AMS]
[ABCDE]
[FGHIJK]
[LMNO]
[12/24 13:50]
[06]
[+10.99]
UN Country Code
UN Loca ti on Code
Fairway Number
Terminal Code
Fairway Hectometre
ETA
Num. Of TugBoats
Air Draught (m)
Inland related vessel data
ETA setting
This menu provides ETA (RFM21) related setting:
•
UN country and location code - the voyage destination should be
entered using UN country (2 characters) and location codes (3 char-
acters) where possible.
•
Fairway Number, Terminal Code & Fairway Hectometre: each is lim-
ited to 5 characters when available
•
ETA - Estimated time / date of arrival at destination (using UTC time)
•
Number of Tugboats: The number of assisting tugboats (from 0 to 6
or unknown)
•
Air Draught: The air draught of the vessel to the nearest centimeter.
draught of the vessel to the nearest cen ti meter.
INLAND ETA SETTING
2013/01/17 23:27:10
Dangerous Targets :0 IL
[NL]
[AMS]
[ABCDE]
[FGHIJK]
[LMNO]
[12/24 13:50]
[06]
[+10.99]
UN Country Code
UN Loca ti on Code
Fairway Number
Terminal Code
Fairway Hectometre
ETA
Num. Of TugBoats
Air Draught (m)
Inland ETA setting
To save the settings, press MENU or ESC and the system will ask
whether the changes should be saved. Select OK to save or CANCEL
to discard and return to main menu.