Simrad TV80, Справочное руководство

Страница: 77 / 306

406388/B
75
5 Allow the installation wizard to run. Follow the instructions provided.
We recommend that you install the software in the default folder suggested by the
wizard.
6 Once the software installation has been completed, double-click the icon on the desktop
to start the program.
7 Depending on your operating system parameters, certain dialog boxes may open.
a The Windows 7 Firewall may open a dialog box requesting information about the
network. Select
Public
, and then select
Allow access
.
b The operating system may also open other dialog boxes to verify that the software
can run on the computer. You must of course permit this.
Further requirements
Observe the dedicated procedure for obtaining and installing the software licence.
Upgrading the TV80 operational software
When a new TV80 software version is released, it must be installed on your Processor Unit.
Prerequisites
In order to upgrade the TV80 software, you need the relevant file set on a suitable media. If
the TV80 software is provided on a CD or a DVD, and your computer is not fitted with a
suitable drive, copy the files to a USB flash drive.
This procedure assumes that you are familiar with the Microsoft ® operating system utilities
for file handling.
Context
The TV80 needs one or more software licenses to work. The software licences are not
affected by the software upgrade.
The new version of the TV80 will automatically replace the old version.
Procedure
1 Turn on the Processor Unit.
2 Switch off any firewall applications.
3 Insert the TV80 software media.
If the TV80 software is provided on a CD or DVD, and your Processor Unit is not fitted
with a suitable drive, copy the files to a USB flash drive.
4 Use a file manager application on the Processor Unit to access the software files.
Operating procedures