Simrad TV80, Справочное руководство, Страница: 75 / 306

406388/B
73
Stopping the TV80 program
You must never turn off the TV80 by means of the on/off switch on the Processor Unit. You
must always exit the TV80 program by selecting
Exit
on the top bar.
Context
When you do not use the TV80, turn off the display and the Processor Unit.
Procedure
1 Observe the TV80 presentation.
2 If you are in the
Installation
dialog box:
a Select the X button in the top right corner to close the current dialog box.
b Observe that the TV80 switches to normal presentation.
c Select
Exit
on the top bar.
3 If you are working in the
Gear Setup
, or
Select Sensor
dialog boxes:
a Select
Close
.
b Select the
X
button in the top right corner to close the current dialog box.
c Observe that the TV80 switches to normal presentation.
d Select
Exit
on the top bar.
4 If you are in a normal presentation:
a Select
Exit
on the top bar.
Observe that the TV80 program closes down.
5 If the Processor Unit does not turn itself off automatically, use the functionality
provided by the operating system to switch it off manually.
6 Turn off the display.
If required, refer to the instructions provided by the display manufacturer.
Operating procedures