Simrad TV80, Справочное руководство

Страница: 45 / 306

406388/B
43
4 On the relevant serial line communication, select the receiver icon.
The
Receiver
dialog box opens.
5 Make the necessary adjustments. Refer to the product accompanying documentation
for more information.
6 At the bottom of the dialog box, select
Apply
to save your settings.
7 Select
OK
to close the dialog box.
Related topics
Receiver dialog box, page 252
I/O Setup page, page 210
Setting up the interfaces to peripheral devices through a LAN
(Ethernet) port
To provide correct information, the TV80 needs to communicate with external devices.
In order to communicate with peripheral devices, the Processor Unit offers several serial
and/or Ethernet (LAN) ports. In the
Add LAN Port
dialog box you can add a new Ethernet
connection and select the system you want the TV80 to interface.
Prerequisites
This procedures assumes that you are familiar with Ethernet communication, IP addresses
and the relevant User Datagram Protocol (UDP) parameters.
Context
Through Ethernet, the TV80 can communicate with any peripheral device that can benefit
from the processed data. This interface will require the absolute identity of the remote UDP
port and the remote IP address.
Getting started