Simrad TV80, Справочное руководство

Страница: 140 / 306

138
406388/B
• The screen captures you make are saved on the hard disk in the Processor Unit on JPG
format.
• Xml data is recorded using the
Record
function on the
Operation
menu. To play back
data, use
Operation
to select Replay mode. This mode allows you to replay previously
recorded data on the TV80. For this reason, the TV80 is inactive during playback.
Note
If you wish to record large amounts of TV80 data, make sure that you have enough space
on your hard disk. Unless your Processor Unit is equipped with a very large disk, we
recommend that you save the data to an external storage device.
Procedure
1 Select the
Operation
icon.
The icon is located under the
Main
menu. It is used to open the
Operation
menu.
2 To start data recording, open the
Record
button, and select On .
Alternatively, simply select the red circle on the right side of the button.
The
Record
button on the top bar changes colour to reflect that recording is active.
3 To stop recording, open the
Record
button, and select Off .
Alternatively, simply select the black rectangle on the left side of the button to stop
the recording.
Related topics
File Setup dialog box, page 192
Record function, page 191
Operation function, page 189
Screen Capture button description, page 147
Screen Captures function, page 213
Selecting Replay mode
The Replay mode allows you to play back previously recorded data. The TV80 is not
operational while in Replay mode. Neither transmission nor reception takes place.
All playback is controlled by the replay bar.
Simrad TV80 Reference Manual