Simrad QS50 Quick Stick
12
20222246 / Rev. A
3
INSTALLATION
3.1
Mounting
The QS50 is designed for arm rest or desktop mounting, indoor
or outdoor. It should be installed where it is most convenient for
the user, and with special regard to environmental specifications
for the unit.
The mounting surface must be flat and even to within 0.5 mm.
•
Drill the 4 mounting holes and make a panel cutout according
to the supplied template.
•
Use the supplied gasket between the panel and the unit.
•
Use the supplied 19 mm screws to fasten the joystick unit to
the panel.
•
Apply the front panel corners.
Optional back cover
For mounting in exposed
environments, the QS50 can be
supplied with an optional back
cover. See page 20 for depth of unit.
The optional back cover has a cable
gland at the bottom. The cable gland
can also be mounted on side of the
back cover.