Simrad ME70 - REV C, Руководство оператора

Страница: 94 / 112

Simrad ME70
How to select a parameter using a submenu
1 Click the middle section of the button to open
a submenu, then click the requested command,
option or button.
The chosen value is applied, and the submenu is
automatically closed.
2 Whenever applicable, you can also access the submenu by clicking the left and right
side of the button. This method will not show you the choices on the submenu.
a
Click on the left side of the button to select a 'lower' submenu choice.
b Click on the right side of the button to select a 'higher' submenu choice.
How to select parameters using a dialog box
1 Click anywhere on the button to open a separate
dialog box.
Main menu
The following functions and parameters are available from the
Main
menu.
1
User Settings
The
User Settings
dialog box allows you to save the
current user settings (parameter selections), and to
retrieve factory or previously saved user settings.
2
Beam Mode Selection
The
Beam Mode Selection
function allows you to
activate one of the pre-defined beam modes.
3
Range
The
Range
function allows you to specify the
vertical range of the water column covered by the
echogram. The range is defined from a selected
start range, and down to a value beneath the
current bottom depth. The value shown and
selected is by default applied only to the currently
selected echogram.
4
Start Range
The
Start Range
function allows you to specify the start depth of the echogram, that
is from which depth in the water column the presentation shall start. The value
shown and selected is applied to the currently selected echogram type.
5
Gain
The purpose of the
Gain
function is to adjust the minimum colour scale threshold
the echogram presentations, and thus creating a display gain effect.
92
378945/B