Simrad IS15 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 46

Simrad IS15 Скачать руководство пользователя страница 32

Setting-Up

20220752G

31

6 SETTING-UP

6.1 First Time Turn on

Note !

Always turn on all NMEA “listeners” and “talkers” connected to the

system before the first time you turn on the IS15 system. This includes

turn on after a COMMUNICATION RESET or a MASTER RESET.
The system will then automatically configure the IS15 NMEA ports as
talkers or listeners.

Before leaving the factory a Master Reset has been performed
on all the instruments. The first time power is applied to a Wind
or Tack instrument, the display will read:

PrES

To assign an instrument to a system, press the

button. In a

multiple instrument system the instruments are assigned to the
system and given an Id number in the same sequence as the
buttons are pressed. The instrument that is assigned as #1 will
be the master unit and broadcast common set-up information
on the Roblink to the other instruments.

Id :1

After having assigned the instrument, turn the system off and
then on (the instrument will display P.OFF if you forget). The
pointer will make a 360° turn and then the instrument will
display apparent wind.

Notes !

1.

When assigning more than one instrument to a system, allow a

few seconds interval between each assignment, while the display is
showing:

– – –

2.

When an instrument is replaced it is important that a Master
Reset has been made on the new one before it is connected to the
system. Refer to Local Master Reset on page 41.

«
...
30
31
32
33
34
...
»

Содержание IS15















































Отзывы:

Нет отзывов