Simrad GI51 Gyro Interface
18
20221594 / Cb
7.2
Supply
Supply voltage:......................... 12, 24 or 32V DC +30%/-10% or
Robnet (26-42V DC
Power consumption:............................................................. 2.4 W
7.3
Interface
Input
Synchro 1:1, ROT max 20°/sec.....................................26 - 115V,
400Hz ref,
11.8-90V L/L,
+/-0.5° accuracy
Synchro 90:1, 360:1, ROT max 12°/sec........................50 - 110V,
50 - 60Hz ref,
20-90V L/L,
+/-0.5° accuracy
Step, 6 step/°, ROT max 20°/sec:.20-70V+40%, common high or
common low
IEC61162-1 / NMEA0183:
Heading:....................................... HDT, HDG, HDM, VHW
Water speed: ..................................................... VBW, VHW
Rate of turn:................................................................... ROT
Note 1
All talker identifiers accepted.
Note 2
VBW, only longitudinal water speed in knots and status are used.
Note 3
VHW, water speed in km/h is ignored.
RGC11 serial heading ................................................... 9600 baud
RGC12 serial heading and rate of turn.......................... 9600 baud
Speed log 200 p/NM ........................Pot. free contact, 20mA max
NFU with mode sel. (S9).................................... Pot. free contacts
Robnet .....................................Heading (steering comp., T or M),
Radar interf. type
Selector............................................................ Pendulum function
offset adjustment