Simrad FU80 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 26

Simrad FU80 Скачать руководство пользователя страница 16

16 |

Operation |

FU80, NF80, QS80 User Guide

Using the FU80

The FU lever can be rotated 70° to port and starboard from mid-

position. The lever will remain in set position, and the commanded
rudder angle/heading change maintained until the lever is returned
to mid-position.

You can use the FU80 in

FU

,

AUTO

and

NoDrift

mode.

You can also get command if the system is in

NFU

,

NAV

or

Wind

mode, but you cannot operate these modes from the FU80.

Initial mode

Lever moved / Resulting mode (action)

Standby

No action

NFU

No action

FU

FU (rudder command)

AUTO

AUTO (heading change)

NoDrift

NoDrift (course change)

NAV

No action

Wind

¼

Note:

The

Wind

mode is not available for AP60, AP70 or AP80

systems.
If the mode is available on other autopilot systems, the mode can
only be used if the system is set up for sailboat. See the Installation
manual for your system.

Mode selection

You toggle between available modes by repeatedly pressing the

MODE

key. The selection times out and triggers a mode shift.

When in any other mode than

FU

, the first press on the

MODE

key

will turn the system to

FU

mode.

You switch to

Standby

from any mode by pressing the

STBY

key.

¼

Note:

It is not possible to use FU80 with an AP24/28 operating on

VRF (Virtual Rudder Feedback).

«
...
14
15
16
17
18
...
»

Содержание FU80



























Отзывы:

Нет отзывов