Simrad ES333-7C - REV A, Руководство по установке, Страница: 17 / 52

How to install the transducer
Example: Medium sized transducer without
clamping ring
The illustration below shows a transducer blister designed for a
medium sized transducers. The same blister design principles
apply. Note that the transducer is mounted without a clamping
ring, which makes it necessary to use a different mounting ring
design.
A
B
C
H
F
E
E
G
D
I
(CD017010E)
A Streamlined blister
B Mounting ring
C
Bolt
D
Self-locking threads
E
Air outlet
F
Forward
G
Transducer cable
H
Transducer
Note that the transducer cable must be provided with a cable loop
inside the blister. Observe the vertical forward edge of the blister.
This will guide the water to each side of the blister.
329786/A
15