Simrad ES120-7C - REV D, Руководство по установке, Страница: 40 / 98

38
330254/B
Note
In case of tapping through holes it is important that the profile of the Emuge self-lock threads
is in the correct direction compared with the entering direction of the bolt.
Gauge
Use Emuge self-lock gauges. Note that the gauge must be used in the correct direction.
Self-lock taps provided by Simrad
The following self-lock taps are on stock at Simrad, and can be ordered from us:
Threads Drill diameter for threads Part no.
M6 ø5.2 700–078838
M8 ø7.0 700–078531
M10 ø8.8 700–078408
M12 ø10.7 700–078409
M16 ø14.5 700–078410
Manufacturer and supplier
•
Manufacturer
: EMUGE-Werk Richard Glimpel, Nurnberger Strasse 96–100, D-90607
Lauf, Germany
•
Manufacturer’s website
: http://www.emuge.de
•
Supplier
: Tingstad AS, P.O. Box 83, Kalbakken, 0920 Oslo, Norway
•
Supplier’s website
: http://www.tingstad.no
•
Supplier
: Ing. Yngve Ege AS, P.O. Box 1, Sentrum, 0101 Oslo, Norway
•
Supplier’s website
: http://www.ege.no/
Simrad ES120-7C Installation Manual