Simrad ES120-7C - REV D, Руководство по установке, Страница: 39 / 98

330254/B
37
Drawing standard
Whenever self-locking threads are required, this is shown on the technical drawing. In the
case of tapping through holes, the arrow at the end of the center line illustrates the screw-in
direction of the bolt.
Note
Always refer to manufacturer’s website for the latest drawings and information about the
self-locking taps. The illustrations and information is for reference only.
The drawing is provided with the following text or similar text:
Note
Drill diameters for threads differ from standard. Self-lock taps can be supplied by Simrad.
Taps
The pretension locking thread self-lock (taps) from manufacturer Emuge must be used.
Installing the transducer