Simrad ES120-7C - REV D, Руководство по установке, Страница: 33 / 98

330254/B
31
You must be equipped with a standard set of tools. This tool set must comprise the normal
tools for electronic and electromechanical tasks. This includes different screwdriver types,
pliers, spanners, a cable stripper, a soldering iron, etc. We recommend that all tools are
demagnetized to protect your equipment. The following specific consumables are required
for this task:
• Fish tape (wire pulling tool) with suitable length
• Electrician’s tape
• Wire wraps
Context
The transducer cable is provided with fixed length. The bushing and the associated parts are
included in the delivery.
Note
All necessary precautions must be made to avoid damage to the cable while pulling it through
the steel conduit. Make sure that all welding has been finalized before you pull the cable
through the steel conduit. Heat may cause serious damage to the cable and the transducer.
These items are all provided as a part of the transducer delivery.
A
Bushing, penetrates the hull plating
B Washer
C
Rubber gasket
D
Packing nipple
Procedure
1 Verify that the steel conduit has been finished, and that all welding has been finalized.
Installing the transducer