Simrad ES120-7C - REV D, Руководство по установке, Страница: 32 / 98

30
330254/B
• Do not lift the transducer by the cable.
• Do not step on the transducer cable.
•
Do not
damage the transducer cable, and avoid exposure to sharp objects.
Procedure
1 Place a protective mat on the cart to safeguard the transducer face.
2 Open the shipping box.
Note
Be careful! Do not use heavy tools. Do not use excessive force. Make sure that you do
not damage the transducer or the cable.
3 Lift the transducer straight up and out of the box.
Note
DO NOT lift it by the cable!
4 Place the transducer on the cart for transport to the mounting location.
5 Transport the transducer carefully to its mounting location.
Related topics
Installing the transducer, page 21
Installing the transducer cable
When the transducer has been placed under its mounting location, the cable can be pulled
through the cable gland and bushing, and then through the steel conduit up to the transceiver.
Prerequisites
Before you can do this task, the following prerequisites must be met:
• All relevant work instructions, procedures and standards must be available.
• The bushing has been installed.
• The steel conduit is mounted with all installation work finalized.
• All relevant drawings have been approved by the classification society.
• All relevant personnel (skilled shipyard workers, ship electricians) and their tools must
be available.
Simrad ES120-7C Installation Manual