Simrad ES 18 - DATASHEET REV C, Руководство по установке

Страница: 56 / 88

54
404770/B
Example
A Steel tank
B
Oil
C
Acoustic window
D Cable service loop
E
Bushing
F
Cable in steel
conduit
G Oil inlet
Using the mounting ring
This large circular is
transducer is designed
to be mounted using the
integrated flange and a mounting ring.The mounting ring is welded to the hole prepared
for the transducer. Bolts through the transducer flange into the mounting ring will secure
the transducer in place.
Note
Make sure that the "Forward" direction on transducer points in the forward direction
of the vessel.
A suitable mounting ring can be provided by Kongsberg Maritime. A drawing is
available for local manufacturing. End user manuals and source drawings (normally in
AutoCad format) can be downloaded from our website.
• https://www.simrad.com
Smooth surface is important
Make sure that the surface of the transducer face, as well as the plating and putty around
the transducer is as even and smooth as possible.Obstructions on these surfaces will
create problems with turbulent flow, and may cause noise.
Mounting screws or bolts must not be extruding from the transducer or the plating
immediately around it.
Note
Obstructions on these surfaces will create problems with turbulent flow, and may cause
noise.
Related topics
Transducer installation principles, page 47
Simrad ES18 Installation Manual