Simrad ES 18 - DATASHEET REV C, Руководство по установке

Страница: 40 / 88

38
404770/B
Connecting the transducer cable to the
transceiver
Once the transducer cable has been installed, you can connect it to the transceiver using
the plug provided.
Prerequisites
Electrical connections can only be made by skilled personnel (ship electricians,
technicians or engineers). All necessary tools and instruments required must be
available. The installation shipyard must prepare detailed drawings of the electrical
system, and identify each cable.
You must be equipped with a standard set of tools. This tool set must comprise the
normal tools for electronic and electromechanical tasks. This includes different
screwdriver types, pliers, spanners, a cable stripper, a soldering iron, etc. Each tool
must be provided in various sizes. We recommend that all tools are demagnetized to
protect your equipment.
Context
The ES18 transducer can be used with a variety of echo sounder transceivers. These use
different plugs and connectors.
Procedure
1 Make sure that an ample length of the transducer cable is available for maintenance
and replacement.
2 Cut the transducer cable.
3 Remove the insulation on the wires in the transducer cable.
4 Make the electrical connections in the transducer plug, and mount the plug assembly.
Related topics
Cable layout and interconnections, page 37
ES18 Connecting to a 12-pin Amphenol socket, page 39
12-pin Amphenol plug , page 42
Simrad ES18 Installation Manual