Simpro Multi-Tip MT1600B, Руководство пользователя

Страница: 9 / 48

User Manual | Simpro Multi-Tip®
Original Instructions | English | v35.0 | December 2019 | Page
8
2.8 Environmental restrictions
The Multi-Tip may be used indoors or outdoors. However, the following restrictions apply:
1. A minimum floor area of two square metres, with a clear passage to exits;
2. Height above sea level not more than 1000m;
3. Ambient temperature not higher than +40
℃
and not lower than -10
℃
;
4. At ambient temperatures above 35
℃
, the relative humidity should not exceed 50%; at
lower temperatures, higher relative humidity is permitted;
Never operate the machine in flammable, explosive, corrosive, acidic or alkaline
environments.
2.9 Ingress protection
Item IP Rating
Push buttons, switches and lamps IP66
Door interlock IP66
Coded magnetic switch IP66
Motor IP54 (note additional protection provided by covers)
Overall IP56 (optional upgrade to IP66 or IP69K)
2.10 Notes
1. This User Manual describes approved procedures for the operation, maintenance,
and routine inspection of the Multi-Tip hydraulic bin-tipping machine.
5. This manual is written in En g sh, s be c s e e he ‘O g I s c s’ f
the purposes of Machinery Directive 2006/42/EC.
6. Operator(s) must read and understand this manual before using the machine.
7. If the machine is to be leased, then this manual shall accompany the machine.
8. This is a generic manual. Simpro reserves the right to change the design of our
products at any time without notification. In cases where the manual does not
correspond with the actual product, use the manual as a reference guide only, and
contact your authorized Simpro agent for assistance if required.
9. Contact your authorized Simpro agent if you encounter any problems or faults with
the machine.
10. Any errors in this manual should be reported by email to info@simpro.world .