Simpro Multi-Tip MT1600B, Руководство пользователя

Страница: 8 / 48

2.5 Duty cycle
The duty cycle of the Multi-Tip depends on the type of power supply and powerpack that is
fitted to the machine, as well as environmental factors and the manner in which the
machine is used. The figures given below are estimates only.
Power Supply
Duty Cycle (tipping at 1600mm)
Throughput (net
tipped material) No. of bins equivalent
(average ~100kg each)
Units
21Ah Battery 2,500kg 25 bins per charge
55Ah Battery 6,000kg 60 bins per charge
B Continuous
Charge
1,500kg 15 bins per hour, nonstop
B Solar Panel 2,000kg 20 bins
per day (in mostly
sunny conditions)
1-Phase Mains 6,000kg 60 bins per hour, nonstop
3-Phase Mains 12,000kg 120 bins per hour, nonstop
The standard Multi-Tip uses a battery power supply. Check the rating plate of your
machine if you are unsure of what type of power it uses.
2.6 Intended operational life
The intended operational life of the Multi-Tip is as follows.
Average Gross Bin Weight Intended operational life
< 50kg 100,000 cycles
50kg – 100kg 75,000 cycles
100kg – 150kg 50,000 cycles
> 150kg 10,000 cycles
2.7 Noise emissions
The noise emissions of the Multi-Tip bin lifter in standard operation have been assessed as not
exceeding ~60 dB(A)
he e ’s e .
Operators are not required to wear hearing protection but are recommended to do so if
using the machine on a constant basis.
ISO standards for machinery safety specify that noise emissions are to be measured in A-
weighted decibels (dB(A)), a unit of volume which is adjusted to reflect the sensitivity of
human hearing. The measurements are taken at a point 1.6 metres above the ground at
he e ’s w k ing position.